biotechrabbit™ YourTaq Hot Start PCR Master Mix is optimized for high yield of amplification of 0.1–3 kb DNA targets, even from low copy number. The mix shows excellent PCR specificity and sensitivity for a broad range of amplicons. YourTaq Hot Start PCR Master Mix is resistant to PCR inhibitors, such as blood (up to 20%), Ethanol or humic acid enabling PCR amplification from DNA templates with carry-over of PCR-inhibitors.
The 2X YourTaq Hot Start PCR Master Mix contains pure biotechrabbit YourTaq Hot Start DNA Polymerase, extremely high-quality dNTPs and optimized PCR buffer; thus, only template, PCR primers and PCR-grade water are added. In addition, the mix is suitable for amplification of GC-rich templates (up to 70%) pairing with 5X PCR Enhancer (BR1900201).
Info: Recommended annealing temperature is 2°C above primer Tm (use gradient PCR to optimize the annealing temperature).
Component | Composition |
YourTaq Hot Start PCR Mix | Optimized 2X YourTaq Hot Start PCR Mix |
STORAGE | -30°C to -10°C (until expiry date – see product label) |
Quality Control
Functional assay
Human genomic DNA was amplified using the PCR Master Mix and specific primers to produce a distinct band.
Prevention of PCR contamination
When assembling the amplification reactions, care should be taken to eliminate the possibility of contamination with undesired DNA.
- Use separate clean areas for preparation of samples and reaction mixtures and for cycling.
- Wear fresh gloves. Use sterile tubes and pipette tips with aerosol filters for PCR setup.
- Use only water and reagents that are free of DNA and nucleases.
- With every PCR setup, perform a contamination control reaction that does not include template DNA.
Standard PCR setup
The standard PCR protocol using biotechrabbit reaction buffer provides excellent results for most applications. Optimization might be necessary for certain conditions, such as the amplification of long targets, high GC or AT content, strong template secondary structures or insufficient template purity. In such cases, optimization of template purification (see biotechrabbit nucleic acid purification kits), primer design and annealing temperature is recommended.
The best conditions for each primer-template can be optimized with the following:
- Choosing the optimal quantities of template and primers
- Using a PCR Enhancer (i.e. BR1900201) for low amounts of template, impure or GC-rich templates
- Optimizing cycling conditions
Basic Protocol
- The Master Mix is designed to be used without any optimization as it has all necessary reaction components in optimal amounts for successful PCR.
- Optionally, use the supplied 5X PCR Enhancer to increase the yield and to lower the background in more complicated PCR reactions (low amounts of template, impure or GC-rich template).
- Thaw on ice and mix all reagents well.
- Keep all reagents and reactions on ice.
- Pipet the master mix into thin-walled 0.2 ml PCR tubes.
- Add template and primers separately if they are not used in all reactions.
Component | Volume | Final concentration |
2X YourTaq Hot Start PCR Mix | 25 µl | 1× |
5X PCR Enhancer (optional - BR1900201) | 10 µl | 1× |
Forward primer | Variable | 0.2–1 µM |
Reverse primer | Variable | 0.2–1 µM |
Template DNA | Variable | 10 pg–1 μg |
| Use 0.01–1 ng for plasmid or phage DNA and 0.05–1 μg for genomic DNA | |
Nuclease free water | Variable |
|
Total volume | 50 µl |
|
- For total reaction volumes other than 50 µl, scale reagents proportionally.
- Mix and centrifuge briefly to collect the liquid in the bottom of the tube.
- Place in the PCR cycler.
Cycling Program
Step | Temperature | Time | Cycles |
Initial activation | 95°C | 2 min | 1 |
Denaturation | 95°C | 30 s | 25–35 |
Annealing* | (55-68°C) | 15–30 s | 25–35 |
| *Recommended annealing temperature is 2°C above Tm of primers. | ||
Extension | 72°C | 30–60 s/kb | 25–35 |
Final extension | 72°C | 5 min | 1 |
| To extend all incomplete PCR products | ||
Storage in the cycler | 4°C | Indefinitely | 1 |
- Add loading dye solution (see 6X DNA Loading Dye, cat. no. BR0800301) to the reactions to analyze PCR products on a gel or store them at −20°C.
You may also be interested in the following product(s)
![]() 2X Pfu PCR Master Mix
Package Sizes |
![]() 5X CAPITAL™ 1-Step qRT-PCR Probe Master Mix, lyophilized
Package Sizes |
![]() AnyScript™ Reverse Transcriptase, 200 U/µl
Package Sizes |
![]() GenUP™ Blood DNA Kit
Package Sizes |
![]() RTS 500 E. coli Disulfide Kit
Package Sizes |